-
A3C Specification
1.04 Quality Assurance
C. Eligible flooring installation journeymen shall possess an INSTALL certification. For those who are not of journeyman status, membership in a State certified apprenticeship program is required.
Page 1
-
AC Tech Specification
1.5 QUALITY ASSURANCE
A. Installer Qualifications: An installer trained and approved by AC Tech or certified by INSTALL (International Standards and Training Alliance) as qualified to perform work of equivalent scope and quality as specified for work of this Section.
Page 1
-
ARDEX Feather Finish Specification
1.5 QUALITY ASSURANCE
A. Installation of the ARDEX product must be completed by a factory-trained applicator, such as an ARDEX LevelMaster® Elite, Choice Contractor or INSTALL Substrate Prep Certified Installer, using mixing equipment and tools approved by the manufacturer. Please contact ARDEX Engineered Cements (724) 203-5000 for a list of recommended installers.
Page 2
-
ARDEX K15 Specification
1.5 QUALITY ASSURANCE
A. Installation of the ARDEX product must be completed by a factory-trained applicator, such as an ARDEX LevelMaster® Elite, Choice Contractor or INSTALL Substrate Prep Certified Installer, using mixing equipment and tools approved by the manufacturer. Contact ARDEX Engineered Cements (724) 203-5000 for a list of recommended installers.
Page 2
-
ARDEX SD-P Specification
1.5 QUALITY ASSURANCE
A. Installation of the ARDEX product must be completed by a factory-trained applicator, such as an ARDEX LevelMaster® Elite, Choice Contractor or INSTALL Substrate Prep Certified Installer, using mixing equipment and tools approved by the manufacturer. Please contact ARDEX Engineered Cements (724) 203-5000 for a list of recommended installers.
Page 2
-
ATPG Concrete Slab Specification
1.5 QUALITY ASSURANCE
1. The Manufacturer shall have experience in the production, sales, and technical support of epoxy and related materials. 2. The Applicator shall have been approved by ATPG Corporation in all phases of surface preparation and application of the product specified, or hold certification from INSTALL (International Standards and Training Alliance) 3. No requests for substitutions shall be considered that would change the generic type of the specified System. 4. A pre-installation conference shall be held between Applicator, General Contractor and the Owner for clarification of this specification, application procedure, quality control, inspection and acceptance criteria and production schedule.
Page 1
-
CBP Cement Underlayment Specification
1.2 QUALITY ASSURANCE
B. Installer Qualifications: 2. INSTALL Substrate Prep Certified installer
Page 2
-
CBP Ceramic Tiling Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Company specializing in performing the work of this section with minimum five years documented experience. 4. For Surface Preparation scope - INSTALL Substrate Prep Certified installer
Page 3
-
CBS Specification
INSTALL Certification is a requirement for journeymen floor coverers, and membership in a state certified apprenticeship program is a requirement for floor coverers who have not yet become journeymen, to be eligible to install flooring on the job site.
-
Cushman & Wakefield Specification
We agree to only permit flooring installers with the appropriate INSTALL Certification requirements.
-
D9 Quality Assurance
-
Mapei Hydraulic Cement Underlayment Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Minimum 2 year experience installing similar products. 2. Installing contractor meets the requirements of a program identified and approved by the architect with the criteria for such program similar to or exceeding; INSTALL certified or equal.
Page 1
-
Nora Project Manager Specification
1.6 QUALITY ASSURANCE
1. Flooring installers shall be Nora Systems approved for the project requirements or have passed INSTALL resilient flooring product certification training program for the requirements of the project.
-
Nora Resilient Specification
1.03 QUALITY ASSURANCE
B. Installer Qualifications: Installer shall be nora® approved or INSTALL (International Standards & Training Alliance) resilient certified for the requirements of the project.
Page 2
-
Obora Phillips Specification
General Quality Assurance
1. Installers: Skilled trades people enrolled in a state-approved apprenticeship program, or certified by a program equal to the INSTALL program.
-
Oyster Bay Specification
Robbins Lane Park
Flooring installers must be skilled trades people enrolled in a State-approved apprenticeship program, or certified by a program equal to the International Standards and Training Alliance (INSTALL).
-
Reliable Bidder Specification
Quality Assurance
Flooring Installers: Skilled trades people holding a valid OSHA 10 and enrolled in a state approved apprenticeship program, or certified by INSTALL or a program equal to the INSTALL program.
Page 4
-
Schonox APF Fiber Reinforced Self Leveling Underlayment Specification
1.03 QUALITY ASSURANCE
E. Installation shall be performed by an INSTALL certified contractor.
-
Schonox Gypsum Cement Underlayment Specification
1.3 SUBMITTALS
F. Installer’s Experience: Installers will be experienced in performing work of this section and specialized in work similar to that required for this project; INSTALL certified or equal.
Page 3
-
Schonox Hydraulic Cement Underlayment Specification
1.3 SUBMITTALS
F. Installer’s Experience: Installers will be experienced in performing work of this section and specialized in work similar to that required for this project; INSTALL certified or equal.
Page 3
-
Sika Level 125 Underlayment Specification
1.02 Quality Assurance
C. Acceptable to the manufacturer: Installers will be experienced in performing work of this section and specialized in work similar to that required for this project; INSTALL certified or equal.
Page 1
-
Sika Level 225 Underlayment Specification
1.02 Quality Assurance
C. Acceptable to the manufacturer: Installers will be experienced in performing work of this section and specialized in work similar tot hat required for this project; INSTALL certified or equal.
Page 1
-
Sika Level 325 Underlayment Specification
1.02 Quality Assurance
C. Acceptable to the manufacturer: Installers will be experienced in performing work of this section and specialized in work similar tot hat required for this project; INSTALL certified or equal.
Page 1
-
Sika Level 425 Underlayment Specification
1.02 Quality Assurance
C. Acceptable to the manufacturer: Installers will be experienced in performing work of this section and specialized in work similar tot hat required for this project; INSTALL certified or equal.
Page 1
-
Sika Level 525 Underlayment Specification
1.02 Quality Assurance
C. Acceptable to the manufacturer: Installers will be experienced in performing work of this section and specialized in work similar tot hat required for this project; INSTALL certified or equal.
Page 1
-
Simovic Specification
Floor covering installation shall have professional flooring installers that have an INSTALL certification. Those who do not possess this certification must be a member of a state-certified apprenticeship training program and registered with the United States Department of Labor, Bureau of Apprenticeship and Training.
-
Smith Clinic Specification
1.6 QUALITY ASSURANCE
3. Use only skilled tradesman who have completed the INSTALL program for floor layers and their qualified helpers, and who are fully experienced in all aspects of the floor covering installations specified herein.
Page 2
-
Sterling SJTP Technology Center Specification
Bidder Responsibility Standards
The bidder and all the bidder’s subcontractors have not defaulted on any project in the last three years and will provide an INSTALL Warranty on Labor.
Page 4
-
Summa Health Specification
This agreement makes it mandatory that only INSTALL Certified Floorcovering Professionals complete all new installation, renovation, and maintenance projects in Summa Health System's hospitals.
-
Tarkett ER3 Modular Master Specification
B. Installer Qualifications
1. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is “qualified” if trained, or certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) carpet installer.
Page 2
-
Tarkett Ethos Modular with Omnicoat Master Specification
B. Installer Qualifications
1. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is “qualified” if trained, or certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) carpet installer.
Page 2
-
Tarkett Flex-Aire Cushion Modular Master Specification
B. Installer Qualifications
1. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is “qualified” if trained, or certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) carpet installer.
Page 2
-
Tarkett Powerbond Cushion Master Specification
B. Installer Qualifications
1. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is “qualified” if trained, or certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) carpet installer.
Page 2
-
Tarkett Powerbond Ethos Cushion Master Specification
B. Installer Qualifications
1. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is “qualified” if trained, or certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) carpet installer.
Page 2
-
Tarkett Powerbond Medfloor Master Specification
B. Installer Qualifications
1. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is “qualified” if trained, or certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) carpet installer.
Page 2
-
Tarkett Specification
1.4 QUALITY ASSURANCE
A. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the various flooring materials specified. An installer is "qualified" if trained by Tarkett or a certified INSTALL resilient floor covering installer.
-
TEC Fiber Reinforced Underlayment Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Firm specializing in installation of cementitious underlayments and toppings, with minimum 5 years documented experience with projects of similar scope, design, and materials. Installation of the HB Fuller Construction products must be completed by a factory-trained applicator, INSTALL Substrate Prep Certified Installer, or equal, using mixing equipment and tools approved by the manufacturer.
Page 1
-
TEC Level Set 200 Underlayment Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Firm specializing in installation of cementitious underlayments and toppings, with minimum 5 years documented experience with projects of similar scope, design, and materials. Installation of the HB Fuller Construction products must be completed by a factory-trained applicator, INSTALL Substrate Prep Certified Installer, or equal, using mixing equipment and tools approved by the manufacturer.
Page 1
-
TEC PerfectFinish Skim Coat Patch Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Firm specializing in installation of cementitious underlayments and toppings, with minimum 5 years documented experience with projects of similar scope, design, and materials. Installation of the HB Fuller Construction products must be completed by a factory-trained applicator, INSTALL Substrate Prep Certified Installer, or equal, using mixing equipment and tools approved by the manufacturer.
-
TEC Polished Concrete Finishing Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Firm specializing in installation of cementitious underlayments and toppings, with minimum 5 years documented experience with projects of similar scope, design, and materials. Installation of the HB Fuller Construction products must be completed by a factory-trained applicator, INSTALL Substrate Prep Certified Installer, or equal, using mixing equipment and tools approved by the manufacturer.
Page 3
-
TEC Surface Preparation Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Firm specializing in installation of cementitious underlayments and toppings, with minimum 5 years documented experience with projects of similar scope, design, and materials. Installation of the HB Fuller Construction products must be completed by a factory-trained applicator, INSTALL Substrate Prep Certified Installer, or equal, using mixing equipment and tools approved by the manufacturer.
Page 2
-
TEC Ultra Wear Surface Specification
1.5 QUALITY ASSURANCE
B. Installer Qualifications: Firm specializing in installation of cementitious underlayments and toppings, with minimum 5 years documented experience with projects of similar scope, design, and materials. Installation of the HB Fuller Construction products must be completed by a factory-trained applicator, INSTALL Substrate Prep Certified Installer, or equal, using mixing equipment and tools approved by the manufacturer.
-
Teknoflor Specification
1.06 QUALITY ASSURANCE
A. Installer Qualifications: Company specializing in installation, must have a minimum of four (4) years experience and employs flooring installers who have retained, and currently hold, a Teknoflor, INSTALL, or a comparable certification.
-
USDVA Athletic Carpeting Specification
1.3 QUALITY ASSURANCE
Installer Qualifications: A company specializing in carpet installation with a minimum three (3) years’ experience and employing experienced flooring installers who have retained, and currently hold, an INSTALL-Certification, or a certification from a comparable certification program, and a valid OSHA 10 certification.
-
USDVA Audie Murphy Hospital Specification
1.6 QUALITY ASSURANCE
A. Installer Qualifications: A company specializing in installation with minimum three (3) years’ experience and employs experienced flooring installers who have retained, and currently hold, an INSTALL Certification, or a certification from a comparable certification program.
Page 2
-
USDVA Carpeting Specification
1.3 QUALITY ASSURANCE
A. Installer Qualifications: A company specializing in carpet installation with a minimum three (3) years’ experience and employing experienced flooring installers who have retained, and currently hold, an INSTALL Certification, or a certification from a comparable certification program, and a valid OSHA 10 certification.
Page 1
-
USDVA Resilient Sheet Specification
1.5 QUALITY ASSURANCE
A. Installer Qualifications: A company specializing in installation with minimum three (3) years’ experience and employs experienced flooring installers who have retained, and currently hold, an INSTALL Certification, or a certification from a comparable certification program.
Page 3
-
USDVA Resilient Tile Specification
1.6 QUALITY ASSURANCE
A. Installer Qualifications: A company specializing in installation with minimum three (3) years’ experience and employs experienced flooring installers who have retained, and currently hold, an INSTALL Certification, or a certification from a comparable certification program.
Page 2
-
Uzin NC 150 Cast Underlayment Specification
1.04 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
Page 1
-
Uzin NC 157 Cast Underlayment Specification
1.04 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
-
Uzin NC 170 Cast Underlayment Specification
1.04 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
Page 1
-
Uzin NC 172 Cast Underlayment Specification
1.04 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
Page 1
-
Uzin NC 182 Cast Underlayment Specification
1.05 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
Page 1
-
Uzin NC 886 Cast Underlayment Specification
1.05 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
Page 1
-
Uzin NC 888 Cast Underlayment Specification
1.05 QUALITY ASSURANCE
B. Installer Qualifications: An authorized representative or INSTALL® (International Standards and Training Alliance) certified installer or equal, who is trained and approved by manufacturer.
Page 1
-
UZIN Specification
1.4 SUBMITTALS
C. Qualification Data: For applicator, must be an approved Uzin applicator. Uzin recommends the use of INSTALL certified contractors.
Page 2
INSTALL Specifications
Find access to all of the INSTALL specifications below. You may download any specification featured, as well.
Specifying that all installation be completed by INSTALL Warranty Contractors and INSTALL certified floorcovering professionals ensures that the flooring on your project will perform to its full potential and live up to the expectations of the owner.